Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Thu Aug 17, 2017 12:37 Post subject:
So ipv6 still not working in r33010m. Added ifconfig ath0 promisc to the command line still not working. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
I wouldn't assume. I have time warner/spectrum and I don't have it. I have to use google's dns servers to get an IPv6 address. _________________ I am far from a guru, I'm barely a novice.
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Sat Aug 19, 2017 13:24 Post subject:
LOL!! I had to go back and checked. I did it right eth0. How do you add google ipv6 dns to the r7500v2? I saw:
For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Sat Aug 19, 2017 14:54 Post subject:
Sorry about the picture size. I did reduce the size by 50%. Will make it smaller. Thanks. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
The second option is the one I use, "DHCPv6 with Prefix Delegation". Prefix length 64, and fill in the Google IPv6 DNS addresses in the fields below that.
Are you seeing a WAN IPv4 and IPv6 address at the top right of your screen?
Joined: 19 Nov 2008 Posts: 274 Location: Madison, CT, US
Posted: Sat Aug 19, 2017 17:31 Post subject:
I do see WAN ipv4 and ipv6 at the top of my scree for the first time. I use WDS so on my laptop now. The WDS station is not ipv6 enabled so I need to check my desktop. Thank you siege. _________________ Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)