Linksys WRH54G

From DD-WRT Wiki

Revision as of 10:42, 30 April 2010 by Glenn (Talk | contribs)
Jump to: navigation, search

Thanks to Eko for getting the device supported.
Special thanks to a9988cd for donation, Tornado and redhawk0 for all the work and testing.

Don't use this image on any other router - for WRH54G only !

Linksys WRH54G is now supported by dd-wrt. No need to replace cfe, but you alwayays need to use special firmware built for wrh54g only. Even for later GUI upgrades.

Upgrading to dd-wrt:

1) Restore to defaults
2) Open upgrade page, select dd-wrt.v24-12548_WRH54G_micro.bin (or other special wrh image)
3) Upgrade
4) When it comes back, be sure to press reset button for 5 s to restore dd-wrt's factory defaults

      • that's it ***

Reverting back to original firmware:

1) Download WRH54G firmware from Linksys
1) Restore to defaults
2) Open upgrade page, select the firmware
3) Upgrade
4) When it comes back, be sure to press reset button for 5 s to restore Linksys's factory defaults

      • that's it ***
Retrieved from "http://wiki.dd-wrt.com/wiki/index.php/Linksys_WRH54G"