Linksys WRT54GS v1.1
From DD-WRT Wiki
Revision as of 15:40, 30 September 2009 (edit) DHC DarkShadow (Talk | contribs) ← Previous diff |
Revision as of 11:39, 1 October 2009 (edit) (undo) DHC DarkShadow (Talk | contribs) (→How to Flash) Next diff → |
||
Line 7: | Line 7: | ||
#Perform a [[Hard_reset_or_30/30/30]] reset | #Perform a [[Hard_reset_or_30/30/30]] reset | ||
#Upload dd-wrt through the firmware update page | #Upload dd-wrt through the firmware update page | ||
- | #<font color=red>'''WAIT'''</font> for at least | + | #<font color=red>'''WAIT'''</font> for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot. |
#Perform a [[Hard_reset_or_30/30/30]] reset | #Perform a [[Hard_reset_or_30/30/30]] reset | ||
- | #<font color=red>'''WAIT'''</font> for at least | + | #<font color=red>'''WAIT'''</font> for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot. |
#Power Cycle | #Power Cycle | ||
#Open your browser to <nowiki>http://192.168.1.1</nowiki>. Configure to your liking. Enjoy. | #Open your browser to <nowiki>http://192.168.1.1</nowiki>. Configure to your liking. Enjoy. |
Revision as of 11:39, 1 October 2009
Contents |
How to Flash
Make sure to get all the files you need first. Start with dd-wrt.v24_mini_generic.bin
- Perform a Hard_reset_or_30/30/30 reset
- Upload dd-wrt through the firmware update page
- WAIT for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Perform a Hard_reset_or_30/30/30 reset
- WAIT for at least five minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Power Cycle
- Open your browser to http://192.168.1.1. Configure to your liking. Enjoy.
JTAG Recovery
JTAG:
- Erase Wholeflash x2
- Flash CFE
- Unplug Power
- Unplug JTAG Cable
TFTP
- Set Rig ip static 192.168.1.10
- Plug network cable from rig to port 1
- Plug in power
- Wait for DMZ light to do a steady pulse, When it is lit on the 3rd time click upgrade. The DMZ light must be lit when you click upgrade.
- Hard Reset 30\30\30
Other Notes
[comment added 4/25/08 by WellingtonFelix] I installed the new version "dd-wrt.v24_mega_generic.bin" over default configuration of the version "dd-wrt.v23_vpn_generic.bin" and I had no problems.
[comment added 5/7/08 by Sapremias] Flashed dd-wrt.v24_mega_generic.bin directly from linksys web interface (version WRT54GSv3_4.71.4.001_fw.bin) without issue. -Sapremias
[comment added 10/5/08 by richwillal] I installed dd-wrt v24 sp1 Mega Vintage (dd-wrt.v24-9517_VINT_mega) from stock firmware with no issues. Standard process: 1) Reset router - reset for 30 secs w/ power on 2) Upload dd-wrt 3) Reset router - reset for 30 secs w/ power on 4) Disconnect/reconnect or ipconfig /renew
[comment added 04/02/09 by tribble222] I nearly bricked my router going directly from Linksys firmware to dd-wrt.v24-11296_VINT_STD.bin. Pinged on boot but tftp wouldn't work. Router didn't even respond to JTAG. Shorting pins 5&6 with the router unplugged somehow fixed everything. From there I was able to flash to mini, then back to std.