Linksys WRT54GS v1.1
From DD-WRT Wiki
DHC DarkShadow (Talk | contribs)
(New page: == How to Flash == Make sure to get all the files you need first. Start with [http://www.dd-wrt.com/routerdb/de/download.php?file=1190 dd-wrt.v24_mini_generic.bin] #Perform a [[Hard_rese...)
Next diff →
Revision as of 22:59, 29 September 2009
How to Flash
Make sure to get all the files you need first. Start with dd-wrt.v24_mini_generic.bin
- Perform a Hard_reset_or_30/30/30 reset
- Upload dd-wrt through the firmware update page
- WAIT for at least two minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Perform a Hard_reset_or_30/30/30 reset
- WAIT for at least two minutes before you continue! (longer is better) Give the router plenty of time to to boot.
- Power Cycle
- Open your browser to http://192.168.1.1. Configure to your liking. Enjoy.
Other Notes
[comment added 4/25/08 by WellingtonFelix] I installed the new version "dd-wrt.v24_mega_generic.bin" over default configuration of the version "dd-wrt.v23_vpn_generic.bin" and I had no problems.
[comment added 5/7/08 by Sapremias] Flashed dd-wrt.v24_mega_generic.bin directly from linksys web interface (version WRT54GSv3_4.71.4.001_fw.bin) without issue. -Sapremias
[comment added 10/5/08 by richwillal] I installed dd-wrt v24 sp1 Mega Vintage (dd-wrt.v24-9517_VINT_mega) from stock firmware with no issues. Standard process: 1) Reset router - reset for 30 secs w/ power on 2) Upload dd-wrt 3) Reset router - reset for 30 secs w/ power on 4) Disconnect/reconnect or ipconfig /renew
[comment added 04/02/09 by tribble222] I nearly bricked my router going directly from Linksys firmware to dd-wrt.v24-11296_VINT_STD.bin. Pinged on boot but tftp wouldn't work. Router didn't even respond to JTAG. Shorting pins 5&6 with the router unplugged somehow fixed everything. From there I was able to flash to mini, then back to std.