Linksys WRT54G v8.1
From DD-WRT Wiki
(Difference between revisions)
Revision as of 15:58, 21 February 2010 (edit) DHC DarkShadow (Talk | contribs) ← Previous diff |
Revision as of 10:46, 30 April 2010 (edit) (undo) Glenn (Talk | contribs) (catchg Category:Linksys guides) Next diff → |
||
Line 5: | Line 5: | ||
This model also has a 128K compressed CFE so it will load micro_plus and micro_plus_ssh directly. Initial flashing of this model requires a modified file with the proper header. You can obtain this file [http://www.dd-wrt.com/phpBB2/download.php?id=4470 here.] After this file is loaded you can then upgrade to any micro_generic.bin file....or one of the micro_plus, micro_plus_ssh mentioned above. | This model also has a 128K compressed CFE so it will load micro_plus and micro_plus_ssh directly. Initial flashing of this model requires a modified file with the proper header. You can obtain this file [http://www.dd-wrt.com/phpBB2/download.php?id=4470 here.] After this file is loaded you can then upgrade to any micro_generic.bin file....or one of the micro_plus, micro_plus_ssh mentioned above. | ||
- | + | [[Category:Linksys guides]] |
Revision as of 10:46, 30 April 2010
NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.
The WRT54Gv8.1 router already has a Linux CFE in the flash. There is no need for running any prep or killer file before the initial flash.
This model also has a 128K compressed CFE so it will load micro_plus and micro_plus_ssh directly. Initial flashing of this model requires a modified file with the proper header. You can obtain this file here. After this file is loaded you can then upgrade to any micro_generic.bin file....or one of the micro_plus, micro_plus_ssh mentioned above.