Linksys WRT610N v2.0
From DD-WRT Wiki
Revision as of 17:30, 7 January 2010 (edit) Acidxchrist (Talk | contribs) (→Installation) ← Previous diff |
Revision as of 17:32, 7 January 2010 (edit) (undo) Acidxchrist (Talk | contribs) (→Installation) Next diff → |
||
Line 19: | Line 19: | ||
ftp://dd-wrt.com/others/eko/V24-K26/svn13575/ | ftp://dd-wrt.com/others/eko/V24-K26/svn13575/ | ||
+ | |||
+ | '''Make sure that you do not flash any build to your router that has the name of a different model router at the end of the filename.''' |
Revision as of 17:32, 7 January 2010
Installation
Make sure you use a firmware with wrt610nv2 in the filename like the one below.
ftp://dd-wrt.com/others/eko/V24-K26/svn13575/dd-wrt.v24-13575_NEWD-2_K2.6_mini_wrt610nv2.bin
a. Flash firmware through the Linksys WebGUI.
b. After a couple minutes you should see an "Update Completed Succesfully" Screen.
c. Wait...at least three minutes after that just to be safe.
d. Do a power cycle of the router. (Unplug the cord, count to 10 and plug it back in.)
e. Wait for the lights to return to normal, usually about 2 minutes.
f. Do a HARD reset. Wait. Check for the password page and login to change the password.
g. After you have DD-WRT on the router then you can flash a different firmware from this folder through the DD-WRT WebGUI.
ftp://dd-wrt.com/others/eko/V24-K26/svn13575/
Make sure that you do not flash any build to your router that has the name of a different model router at the end of the filename.