Netgear WNDR3800
From DD-WRT Wiki
(Difference between revisions)
Revision as of 23:38, 6 July 2012 (edit) Buddee (Talk | contribs) (add a few infos, this still needs alot of work..) ← Previous diff |
Revision as of 23:39, 6 July 2012 (edit) (undo) Buddee (Talk | contribs) m (typos - fixed) Next diff → |
||
Line 37: | Line 37: | ||
=Flashing Instructions= | =Flashing Instructions= | ||
- | + | '''If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16 - you will need to downgrade to atleast 1.0.0.16 - as of 1.0.0.18 or greater, Netgear has put a check in their firmware revisions to disallow anything but Netgear's firmware to be used.''' | |
You will need these files for the flashing procedure. | You will need these files for the flashing procedure. |
Revision as of 23:39, 6 July 2012
Place holder for netgear WNDR3800, please add infos as needed.
Hardware Information
CPU | Atheros AR7161 |
---|---|
CPU Speed | 680 MHz |
Flash ROM | 16 MB |
RAM | 128 MB |
Radio | 2x 2.4 GHz or 5 GHz |
WLAN Support | a/b/g/n |
WLAN Max Speed | 300 mbps |
Antenna Location | Internal |
Switch | 4x GigE LAN + 1 GigE WAN |
Flashing Instructions
If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16 - you will need to downgrade to atleast 1.0.0.16 - as of 1.0.0.18 or greater, Netgear has put a check in their firmware revisions to disallow anything but Netgear's firmware to be used.
You will need these files for the flashing procedure.
If you have a North American model, you will need this for the initial flash.
If you have an EU or Asia model, you will need this for the initial flash.
The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin