Netgear WNDR3800
From DD-WRT Wiki
Revision as of 22:27, 4 April 2016 (edit) Sploit (Talk | contribs) (→WNDR3800CH Flashing) ← Previous diff |
Current revision (04:26, 9 January 2022) (edit) (undo) Kernel-panic69 (Talk | contribs) ((Re-add WNDR300CH information)) |
||
(9 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
[[Image:wndr3800-1.jpg | right | 200px]] | [[Image:wndr3800-1.jpg | right | 200px]] | ||
__TOC__ | __TOC__ | ||
- | =Hardware Information= | + | = Hardware Information = |
{| border="1" cellspacing="0" | {| border="1" cellspacing="0" | ||
Line 34: | Line 34: | ||
- | =Flashing Instructions= | + | = Flashing Instructions = |
'''If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16, then you will first need to downgrade to firmware no greater than 1.0.0.16 (from [http://support.netgear.com/product/WNDR3800 here]). Netgear put a check in firmware greater than 1.0.0.16 to allow only Netgear firmware from the Web GUI. It hasn't been confirmed if you can flash DD_WRT using TFTP with stock firmware greater than 1.0.0.16.''' | '''If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16, then you will first need to downgrade to firmware no greater than 1.0.0.16 (from [http://support.netgear.com/product/WNDR3800 here]). Netgear put a check in firmware greater than 1.0.0.16 to allow only Netgear firmware from the Web GUI. It hasn't been confirmed if you can flash DD_WRT using TFTP with stock firmware greater than 1.0.0.16.''' | ||
Line 42: | Line 42: | ||
If you have a North American model, you will need this for the initial flash. | If you have a North American model, you will need this for the initial flash. | ||
- | + | wndr3800-factory_NA.img from the netgear-wndr3800 folder | |
If you have an EU or Asia model, you will need this for the initial flash. | If you have an EU or Asia model, you will need this for the initial flash. | ||
- | + | wndr3800-factory.img from the netgear-wndr3800 folder | |
The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin | The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin | ||
+ | |||
+ | See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] for links. | ||
For going from 1.0.0.16 Netgear firmware to DD-WRT on a WNDR3800, installation goes like this: | For going from 1.0.0.16 Netgear firmware to DD-WRT on a WNDR3800, installation goes like this: | ||
Line 70: | Line 72: | ||
ftp://ftp.dd-wrt.com/betas/ | ftp://ftp.dd-wrt.com/betas/ | ||
- | <br/> | ||
- | <br/> | ||
- | =WNDR3800CH Flashing= | ||
- | <ol> | ||
- | <li>Disassemble router and connect a serial port adapter to J1 connector</li> | ||
- | <li>Establish serial/terminal session at 115200,8,N to serial port </li> | ||
- | <li>Apply power to router. </li> | ||
- | <li>Interrupt U-Boot on the serial console by repeatedly pressing ENTER</li> | ||
- | <li>Reset board model ID using '''board_model_id_set WNDR3800'''</li> | ||
- | <li>Reboot router</li> | ||
- | <li>Web load Netgear v1.0.0.16 firmware</li> | ||
- | <li>Web load wndr3800-factory.img firmware</li> | ||
- | </ol> | ||
- | <br/> | ||
- | <br/> | ||
- | + | = WNDR3800CH Flashing = | |
- | + | NOTE: This device [https://svn.dd-wrt.com/ticket/3691 is not officially supported yet], however it can be flashed using the file contained in [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=275896 this forum thread] and then upgraded to a more recent build using the wndr3800-webflash.bin file for the WNDR3800. | |
- | + | = Unbricking = | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | = Unbricking= | + | |
See '''[http://kb.netgear.com/app/answers/detail/a_id/19841 Reinstall the firmware on a router without the setup CD recovery tool]''' | See '''[http://kb.netgear.com/app/answers/detail/a_id/19841 Reinstall the firmware on a router without the setup CD recovery tool]''' | ||
+ | |||
+ | |||
+ | '''TFPT Recovery - Sploit Notes''' | ||
+ | |||
+ | Revision to procedures coming soon... | ||
+ | |||
[[Category:Netgear guides]] | [[Category:Netgear guides]] |
Current revision
Contents |
[edit] Hardware Information
CPU | Atheros AR7161 |
---|---|
CPU Speed | 680 MHz |
Flash ROM | 16 MB |
RAM | 128 MB |
Radio | 1x 2.4GHz and 1x 5GHz |
WLAN Support | a/b/g/n |
WLAN Max Speed | 300 mbps |
Antenna Location | Internal |
Switch | 4x GigE LAN + 1 GigE WAN |
[edit] Flashing Instructions
If you have an WNDR3800 with stock firmware, and the version is greater than 1.0.0.16, then you will first need to downgrade to firmware no greater than 1.0.0.16 (from here). Netgear put a check in firmware greater than 1.0.0.16 to allow only Netgear firmware from the Web GUI. It hasn't been confirmed if you can flash DD_WRT using TFTP with stock firmware greater than 1.0.0.16.
You will need these files for the flashing procedure.
If you have a North American model, you will need this for the initial flash.
wndr3800-factory_NA.img from the netgear-wndr3800 folder
If you have an EU or Asia model, you will need this for the initial flash.
wndr3800-factory.img from the netgear-wndr3800 folder
The other file located within the WNDR3800's dd-wrt dir is for upgrading to newer or older dd-wrt builds from within the dd-wrt webgui. Its naming scheme looks like so - wndr3800-webflash.bin
See Where do I download firmware? for links.
For going from 1.0.0.16 Netgear firmware to DD-WRT on a WNDR3800, installation goes like this:
- Set a static IP such as: 192.168.1.3 subnet:255.255.255.0 gateway:192.168.1.1 on the PC you will be using for the flash.
- Connect the PC to one of the router's LAN ports (unplug your ISP modem for the moment)
- Make sure to Reset to Defaults on the router prior to flashing. This can be done by performing a Hard Reset
- In your web browser, go to http://192.168.1.1
- Find the “Router Upgrade” in the menu and enter that section.
- Upload the .img firmware file, that you downloaded from the link above.
- Wait 5 minutes after the router says it is done.Make sure you clear your browsers cache between updating firmwares.
- Perform one more Hard Reset, then login at 192.168.1.1 and begin configuring.
- Enjoy dd-wrt and do not forget to donate if possible.
- Should you want to use DHCP ip assignment, remember to un-set the static ip that you set in the above instructions.
This unit was supported as of build 18687.
For updating to a newer dd-wrt build, you should be able to use the wndr3800-webflash.bin mentioned above. Make sure to reset to defaults with a hard reset as listed above and download the appropriate dd-wrt build that you are wanting to update to. New builds can be found within the dd-wrt file server:
[edit] WNDR3800CH Flashing
NOTE: This device is not officially supported yet, however it can be flashed using the file contained in this forum thread and then upgraded to a more recent build using the wndr3800-webflash.bin file for the WNDR3800.
[edit] Unbricking
See Reinstall the firmware on a router without the setup CD recovery tool
TFPT Recovery - Sploit Notes
Revision to procedures coming soon...