Wireless-N Throughput Testing
From DD-WRT Wiki
Revision as of 00:45, 18 February 2011 (edit) Phuzi0n (Talk | contribs) (→Phuzi0n - retested WRT400N+WNDA3100v2 gave better 40MHz throughput but 20MHz was still poor and 5GHz 40MHz worsened to 55mbps/50mbps) ← Previous diff |
Revision as of 22:30, 9 May 2011 (edit) (undo) Phuzi0n (Talk | contribs) (→Phuzi0n - - e1000 v2.0 prep) Next diff → |
||
Line 282: | Line 282: | ||
| 95mbps | | 95mbps | ||
| 95mbps | | 95mbps | ||
+ | |- | ||
+ | |||
+ | |- | ||
+ | | rowspan=4 | E1000 v2.0 | ||
+ | | STOCK 2.0.00 | ||
+ | | Netgear WN111v2 | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | |- | ||
+ | |||
+ | |- | ||
+ | | STOCK 2.0.00 | ||
+ | | Netgear WNDA3100v2 | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | |- | ||
+ | |||
+ | |- | ||
+ | | 16994 | ||
+ | | Netgear WN111v2 | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | |- | ||
+ | |||
+ | |- | ||
+ | | 16994 | ||
+ | | Netgear WNDA3100v2 | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
+ | | - | ||
|- | |- | ||
Revision as of 22:30, 9 May 2011
English • Deutsch • Español • Français • Italiano • 日本語 • Polski • Português • Русский • Svenska • 中文(中国大陆) • 中文(台灣) • |
Introduction
This page contains user tested throughput results for N spec devices. Please be sure to read Wireless-N Configuration for information about how to configure your N spec equipment before posting your own results. When you do post your results, be sure to provide as much information as possible about how you tested it.
Some key things to post are:
- Exact router model including the model version
- Exact firmware (build number and version)
- Distance and any obstructions for range tests (otherwise have ~1 meter separation)
- Spectrum (2.4GHz or 5GHz) and channel settings
- Exact client adapter model
- The MIMO capabilities of your client adapter ie. 1x2, 2x2, etc.
Results
Phuzi0n
I do all my tests at ~1 meter distance while ensuring that the link rate is maxed out at 130mbps for 20MHz channel width or >270mbps for 40MHz width. I use jperf/iperf set to use a 2MB TCP window for all my tests. A quirk of mine is that I test multiple times but then I take the best few results and round them to the nearest multiple of 5 to just have a general idea of the best throughput attainable. The Netgear WN111v2 client adapter is 1x2 MIMO 2.4GHz only and the WNDA3100v2 is 2x2 MIMO on both bands.
Model | Build | Client Adapter | 2.4GHz Band | 5GHz Band | ||||||
---|---|---|---|---|---|---|---|---|---|---|
20MHz | 40MHz | 20MHz | 40MHz | |||||||
Up | Down | Up | Down | Up | Down | Up | Down | |||
WRT150N v1.1 | 12548 NEWD | Netgear WN111v2 | 40mbps | 40mbps | 55mbps | 55mbps | - | - | - | - |
13230 NEWD2 | Netgear WN111v2 | 45mbps | 60mbps | 85mbps | 60mbps | - | - | - | - | |
WHR-G300N | STOCK 1.60 | Netgear WN111v2 | 40mbps | 60mbps | 30mbps | 70mbps | - | - | - | - |
13064 | Netgear WN111v2 | 45mbps | 80mbps | 80mbps | 90mbps | - | - | - | - | |
WRT300N v1.1 | STOCK 1.51.2 | Netgear WN111v2 | 40mbps | 80mbps | 45mbps | 85mbps | - | - | - | - |
13492 NEWD | Netgear WN111v2 | 40mbps | 75mbps | 35mbps | 75mbps | - | - | - | - | |
13492 NEWD2 | Netgear WN111v2 | 40mbps | 70mbps | 45mbps | 90mbps | - | - | - | - | |
WNDR3300 | STOCK V1.0.29NA | Netgear WN111v2 | 45mbps | 90mbps | 80mbps | 95mbps | - | - | - | - |
STOCK V1.0.45NA | Netgear WN111v2 | 45mbps | 90mbps | 80mbps | 95mbps | - | - | - | - | |
14471 NEWD | Netgear WN111v2 | 40mbps | 55mbps | 55mbps | 60mbps | - | - | - | - | |
14471 NEWD2 | Netgear WN111v2 | 40mbps | 55mbps | 60mbps | 60mbps | - | - | - | - | |
14471 NEWD | Netgear WNDA3100v2 | 60mbps | 55mbps | 60mbps | 60mbps | 65mbps | 60mbps | 65mbps | 60mbps | |
WRT320N | STOCK v1.0.03 | Netgear WN111v2 | 40mbps | 85mbps | - | - | - | - | - | - |
STOCK v1.0.03 | Netgear WNDA3100v2 | 50mbps | 85mbps | - | - | 70mbps | 95mbps | 80mbps | 100mbps | |
14471 K2.6 | Netgear WN111v2 | 45mbps | 65mbps | 85mbps | 90mbps | - | - | - | - | |
14471 K2.6 | Netgear WNDA3100v2 | 70mbps | 65mbps | 90mbps | 100mbps | 60mbps | 80mbps | 105mbps | 100mbps | |
WRT400N | 15704 | Netgear WN111v2 | 45mbps | 80mbps | 85mbps | 85mbps | - | - | - | - |
15704 | Netgear WNDA3100v2 | 55mbps | 55mbps | 95mbps | 90mbps | 75mbps | 85mbps | 95mbps | 95mbps | |
E1000 v2.0 | STOCK 2.0.00 | Netgear WN111v2 | - | - | - | - | ||||
STOCK 2.0.00 | Netgear WNDA3100v2 | - | - | - | - | |||||
16994 | Netgear WN111v2 | - | - | - | - | |||||
16994 | Netgear WNDA3100v2 | - | - | - | - |
Note: There seems to be some sort of compatibility problem with the WNDA3100v2 client uploading to the WRT320N that caused it to frequently give no throughput for short periods of time regardless of the band or firmware used.