howto:general:routing:static_routing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
howto:general:routing:static_routing [2015/05/19 11:56]
admin [Use-case]
howto:general:routing:static_routing [2018/05/24 09:05] (current)
Line 10: Line 10:
 ==== Use-case ==== ==== Use-case ====
  
-All requests to dd-wrt.com should be routed ​throug ​a given gateway.+Static routes can be used to route connections to a specific host or address trough a specific interface,​ 
 +which may be a VPN-Connection. 
 + 
 +All requests to dd-wrt.com should be routed ​through ​a given gateway.
  
 ^ Static-Route properties ^^ ^ Static-Route properties ^^
 | interface | wan | | interface | wan |
-| target | 83.141.4.21 (dd-wrt.com)|+| target | 83.141.4.210 (dd-wrt.com)|
 | netmask | 255.255.255.255 | | netmask | 255.255.255.255 |
 | gateway | 172.27.0.1 | | gateway | 172.27.0.1 |
Line 70: Line 73:
 ===== Troubleshooting ===== ===== Troubleshooting =====
  
-Not available, yet +You can check if the route has been applied successful by looking at the routing table with the **route** command 
 +<​code>​ 
 +# route 
 +Kernel IP routing table 
 +Destination ​    ​Gateway ​        ​Genmask ​        Flags Metric Ref    Use Iface 
 +default ​        ​172.27.0.1 ​     0.0.0.0 ​        ​UG ​   0      0        0 eth1 
 +84.141.4.210 ​   172.27.0.1 ​     255.255.255.255 UGH   ​0 ​     0        0 eth1 
 +172.27.0.0 ​     *               ​255.255.255.0 ​  ​U ​    ​0 ​     0        0 eth1 
 +192.168.1.0 ​    ​* ​              ​255.255.255.0 ​  ​U ​    ​0 ​     0        0 br-lan 
 +</​code> ​
  
 +The field '​Destination'​ should match the target from the UCI configuration,​
 +Gateway matches Gateway, and the Iface should match the actual interface name. 
  
  
howto/general/routing/static_routing.1432036597.txt.gz · Last modified: 2018/05/24 09:05 (external edit)