====== Wake on LAN ======

Wake-on-LAN is an ethernet protocol for waking computers up from a very low power mode remotely. This was created by AMD in collaboration with Hewlett-Packard.

===== GUI =====

1. Open your router's configurations website and login (default: 192.168.11.1)

2. Go to Network Services --> Wake on LAN

3. Add a new entry with the [+] Button

4. Enter a Device Name (only for managing entries)

5. Enter the MAC Address of the device you want to wake up

6. If needed: enter the password from your target / check the box to wake up the target on boot


{{ :howto:general:wireless:wol2.png?direct |}}

Make sure you have enabled wake on lan on your target! Mostly you will find this option in the bios under 'Power'.