====== Howto-Template ======

Just an empty template for new howto's.

===== Overview =====

==== Level of difficulty ===

   Easy

==== Use-case ====

If someone wants to add a new howto, this might safe some work.

^ proberties of scenario ^^
| some propertie | some value |
| some other propertie | some other value |
| ... | ... |

==== Related topics ====

  * [[documentation:configuration:uci|UCI]]
  * [[documentation:configuration:config_files:config_files_involved|/etc/config/config_file]]
  
===== Instructions =====

==== GUI ====

Not available, yet

==== UCI Config System ====

  * **Add something**
<code>
uci add network rule                                         
uci set network.@rule[-1].interface=wan                      
uci set network.@rule[-1].target=84.141.4.210                
uci set network.@rule[-1].netmask=255.255.255.255            
uci set network.@rule[-1].gateway=172.27.0.1                 
</code>        

  * **Store changes**
<code>
uci commit network
</code>

  * **Apply changes**
<code>
/etc/init.d/network restart
</code>

==== UCI config files (native) ====

Routes are defined in [[documentation:configuration:config_files:config_network|/etc/config/network]]

   * **Add new rule-section**
<code>
config 'route'                                                                  
        option 'interface' 'wan'                                                
        option 'target' '83.141.4.210'                                          
        option 'netmask' '255.255.255.255'                                      
        option 'gateway' '172.27.0.1' 
</code>

===== Troubleshooting =====

Not available, yet