Table of Contents

Howto-Template

Just an empty template for new howto's.

Overview

Level of difficulty

 Easy

Use-case

If someone wants to add a new howto, this might safe some work.

proberties of scenario
some propertie some value
some other propertie some other value
… …

Instructions

GUI

Not available, yet

UCI Config System

uci add network rule                                         
uci set network.@rule[-1].interface=wan                      
uci set network.@rule[-1].target=84.141.4.210                
uci set network.@rule[-1].netmask=255.255.255.255            
uci set network.@rule[-1].gateway=172.27.0.1                 
uci commit network
/etc/init.d/network restart

UCI config files (native)

Routes are defined in /etc/config/network 

config 'route'                                                                  
        option 'interface' 'wan'                                                
        option 'target' '83.141.4.210'                                          
        option 'netmask' '255.255.255.255'                                      
        option 'gateway' '172.27.0.1'

Troubleshooting

Not available, yet