Linksys E3200
From DD-WRT Wiki
Hardware Specifications
CPU | Broadcom BCM5357 | 500 MHz |
---|---|---|
Flash ROM | Winbond 25Q128BUFG | 16 MB |
RAM | EtronTech EM6AB160TSC-5G 32M x 16 bit | 64 MB |
Radios | 2.4 GHz, 5 GHz | |
WLAN Support | a/b/g/n | |
WLAN Max Speed | 300 mbps | |
Antenna Location | Internal | |
Switch | BCM53125SKMMLG | 4x GigE + 1 WAN |
USB | 1x USB 2.0 |
You can use some of these figures to come up with what Tx power rating would be best for you. As factory lists it a max of 20dBm then a setting of 100mW could be used as 20dBm = 100mW 17dBm = 50mW and so on.
2.4GHz output power per TX chain
802.11b: Max. 20.5dBm @ All rates
802.11g: Max. 20.5dBm @ Low rates
Max. 19.5dBm @ High rates
Wireless-N 20MHz: Max. 20.5dBm @ Low rates
Max. 18.5dBm @ High rates
Wireless-N 40MHz: Max. 17.0dBm @ All rates
5GHz output power per TX chain
UNII-1 (5150-5250GHz)
802.11a: Max. 14.0dBm @ All rates
Wireless-N 20MHz: Max. 11.5dBm @ All rates
Wireless-N 40MHz: Max. 12.0dBm @ All rates
UNII-3 (5725-5850GHz)
802.11a: Max. 17.5dBm @ High rates
802.11a: Max. 20.0dBm @ Low rates
Wireless-N 20MHz: Max. 17.5dBm @ High rates
Wireless-N 20MHz: Max. 20.0dBm @ Low rates
Wireless-N 40MHz: Max. 17.5dBm @ High rates
Wireless-N 40MHz: Max. 21.0dBm @ Low rates
Internal PIFA antennas are rated at 3dBi