Linksys WRT54GS v1.1
From DD-WRT Wiki
Contents |
[edit] How to Flash
WARNING - A HARD RESET CAN BRICK THIS ROUTER. SEE THE PEACOCK ANNOUNCEMENT AND THE THREAD LINKED IN NOTE 1. Details are here.
Initial flash: download mini_generic.bin
- Perform a Hard_reset_or_30/30/30 reset
- Upload dd-wrt through the firmware update page
- WAIT at least five minutes before continuing!
- Hard_reset_or_30/30/30 again
- When the DD-WRT GUI is available (http://192.168.1.1), set a password and configure.
- Power cycle if any issue is encountered.
For DD-WRT upgrades, use the GUI (still with mini_generic.bin).
[edit] Recovery
TFTP:
- Set static IP on the computer e.g. 192.168.1.10
- Use a wired LAN connection to port 1
- Power up the router
- Wait for a steady pulse from the DMZ LED. On the third pulse (with DMZ lit) click upgrade.
- Hard Reset 30/30/30
JTAG:
- Erase Wholeflash x2
- Flash CFE
- Unplug Power
- Unplug JTAG Cable
[edit] Other Notes
The traditional Peacock recommended build is 14929 and a good reference point for testing.
- For a build that fixes the krack vulnerability and GTK rekey issues, start with 41686.