Linksys WRT54GS v2.0
From DD-WRT Wiki
(Difference between revisions)
Revision as of 03:06, 19 August 2014 (edit) Ghz24 (Talk | contribs) (→Other Notes) ← Previous diff |
Revision as of 01:14, 1 May 2020 (edit) (undo) Jeremywh7 (Talk | contribs) (Fix dead links and deprecated info.) Next diff → |
||
Line 1: | Line 1: | ||
- | == | + | ==WRT54GS v2.0 [http://techinfodepot.shoutwiki.com/wiki/Linksys_WRT54GS_v2.0 Specs]== |
+ | *Chipset: BCM4712 | ||
+ | *Ram: 32 MB | ||
+ | *Flash: 8 MB | ||
- | == '''WRT54GS v2''' == | ||
- | '''Chipset - BCM4712 -- Ram - 32mb -- Flash - 8mb''' | ||
- | + | ==How To Flash== | |
- | + | Read the [[Firmware FAQ]] and Broadcom forum build threads '''before upgrading!''' | |
- | | + | #Use GUI or [[TFTP flash]] with a wired connection. Disable wireless to be safe. |
- | + | #'''DO NOT 30/30/30 HARD RESET''' this model as this could brick your router. See the [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486 Peacock Announcement] Note 1. | |
- | '''Initial Flash-''' | ||
- | + | ==Initial Flash== | |
- | * ''' '' | + | Download ''[https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin Build 14929 dd-wrt.v24_mini_wrt54gs.bin]'' |
+ | #'''Reset''' by keeping the router powered on and holding the reset button until the lights flash (up to 30sec) | ||
+ | #Open 192.168.1.1 in a web browser (if issues are encountered, try another browser) | ||
+ | #*User = (Leave Blank) | ||
+ | #*Password = admin | ||
+ | #*''If this does not work, '''see the above reset info''' to restore to factory defaults. | ||
+ | #Check the firmware version in the top right corner to be 4.71.4, otherwise flash: | ||
+ | #*''[https://dd-wrt.com/phpBB2/download.php?id=20701 WRT54GS_4.71.4.001_fw.2.bin]'' (factory firmware was removed by Linksys) | ||
+ | #*'''DO NOT flash this to a WRT54GSv1''' | ||
+ | #Go to ''Administration'' -> ''Factory Defaults'' -> ''Restore'' -> ''Apply Settings'' to flash ''dd-wrt.v24_mini_wrt54gs.bin'' | ||
+ | #*'''Wait 5 minutes for the router to reboot''' | ||
+ | #*If no response, unplug the router for 10 seconds then plug it back in | ||
+ | #Access the GUI to set a password | ||
- | Also download this VINT File: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin | ||
- | ''' | + | ==Upgrade Flash== |
- | + | #Go to ''Administration'' -> ''Firmware Upgrade'' to select the file to ''Upgrade'' | |
- | + | #'''Wait 5 minutes for the router to reboot (power cycle if needed) then '''reset''' | |
- | + | #Access the GUI to set a password and configure | |
- | + | ||
- | + | ||
- | '''FLASHING''' | ||
- | '''At this time the only thing connected to the router is the Power and Ethernet to PC''' | ||
- | '''The Steps Listed Below Are For Flashing via the Web GUI - NOT TFTP" | ||
- | # '''READ the Peacock Announcement prior to flashing: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486''' | ||
- | # '''Open IE and enter the following address: 192.168.1.1''' | ||
- | ##User = (Leave Blank) | ||
- | ##Password = admin | ||
- | ###''If you don't know the Login Info, '''Do a Reset.''' This will restore the router back to factory defaults.'' | ||
- | # '''Look at the top Right Corner and make sure your Firmware is at 4.71.4''' | ||
- | ## If your Firmware IS up to date, Go to: Administration > Factory Defaults > Restore > Apply Settings | ||
- | ### ''Wait 5 minutes for the Router to Re-boot'' | ||
- | ## If your Firmware is NOT up to date, Go to: Administration > Firmware Upgrade (select the 4.71.4 file that you saved from above) > Upgrade | ||
- | ### ''Wait 5 minutes for the Router to Re-boot'' | ||
- | # '''Reset''' | ||
- | # '''Open IE and enter the following address: 192.168.1.1 and Login with the Default Info in Step 1''' | ||
- | # '''Go to: Administration > Firmware Upgrade (''select the dd-wrt.v24_mini_wrt54gs.bin'') > Upgrade''' | ||
- | ## Wait 5 minutes for the Router to Re-boot | ||
- | #'''Reset''' | ||
- | #'''Power Cycle (Unplug the Router from the power and wait 10 seconds before you plug it back in''' | ||
- | #'''Open IE and enter the following address: 192.168.1.1''' | ||
- | ##User = root | ||
- | ##Password = admin | ||
- | ###''You don't need to enter new Login info yet since you will be flashing a different version of dd-wrt and will need to set it once you are done with the next flash'' | ||
- | #'''Go to: Administration > Firmware Upgrade (''select the VINT file you downloaded earlier ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin'') > Upgrade''' | ||
- | #'''Wait 5 minutes for the Router to Re-boot''' | ||
- | #'''Reset''' | ||
- | #'''Power Cycle''' | ||
- | #'''Open IE and enter the following address: 192.168.1.1''' | ||
- | #'''Enter a New User Name and Password''' | ||
- | #'''Now you can enjoy your DD-WRT Firmware and change the settings you need to change''' | ||
- | |||
- | If you wish to use another version of dd-wrt follow the same steps you followed for flashing the VINT file. You can use Vint_Mini, Vint_Std or Vint_Mega on this router. Here is a link to the VINT files: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/ | ||
- | |||
- | == Other Notes == | ||
- | |||
- | Outdated comments removed May 12, 2011. | ||
- | |||
- | Comment [[User:ghz24|ghz24]] August 2014:Regardless of warnings firefox/ubuntu 14.10 performed flash flawlessly. | ||
[[Category:Linksys guides]] | [[Category:Linksys guides]] |
Revision as of 01:14, 1 May 2020
Contents |
WRT54GS v2.0 Specs
- Chipset: BCM4712
- Ram: 32 MB
- Flash: 8 MB
How To Flash
Read the Firmware FAQ and Broadcom forum build threads before upgrading!
- Use GUI or TFTP flash with a wired connection. Disable wireless to be safe.
- DO NOT 30/30/30 HARD RESET this model as this could brick your router. See the Peacock Announcement Note 1.
Initial Flash
Download Build 14929 dd-wrt.v24_mini_wrt54gs.bin
- Reset by keeping the router powered on and holding the reset button until the lights flash (up to 30sec)
- Open 192.168.1.1 in a web browser (if issues are encountered, try another browser)
- User = (Leave Blank)
- Password = admin
- If this does not work, see the above reset info to restore to factory defaults.
- Check the firmware version in the top right corner to be 4.71.4, otherwise flash:
- WRT54GS_4.71.4.001_fw.2.bin (factory firmware was removed by Linksys)
- DO NOT flash this to a WRT54GSv1
- Go to Administration -> Factory Defaults -> Restore -> Apply Settings to flash dd-wrt.v24_mini_wrt54gs.bin
- Wait 5 minutes for the router to reboot
- If no response, unplug the router for 10 seconds then plug it back in
- Access the GUI to set a password
Upgrade Flash
- Go to Administration -> Firmware Upgrade to select the file to Upgrade
- Wait 5 minutes for the router to reboot (power cycle if needed) then reset
- Access the GUI to set a password and configure