Talk:Linksys WAP54G

From DD-WRT Wiki

Revision as of 18:44, 16 April 2010 by C4f (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

For ver 3.x I bricked my wap54g when I followed the instructions

  1. Unplug power. Wait 15 seconds
  2. Press and hold Reset Button on WAP unit for 30 seconds, unplug unit, Plug back in still holding reset button an additional 30 seconds.

I suspect that this is either a bad thing to do if the device has acquired an IP already or the power cycling itself in this manner is damaging. I have been unable to get any response from the device in any way and it was working 5 minutes prior to this attempt with latest manufacturer firmware.

I would be more than happy to see if this can be recreated/resolved however the device suffered damage and need to fix the power plug on the PCB.