Linksys WRT54GS v1.0
From DD-WRT Wiki
How To Flash
CONFIRMED INSTRUCTIONS:
Initial Flashing:
- Read the peacock announcement at the top of the broadcom forum!
- Device had the original Linksys firmware on it.
- Connected power and Ethernet cable to the router.
- 30-30-30 Hard Reset.
- Waited until lights returned to normal (longer is better).
- There is A LOT of WAITING. Cannot emphasize that enough. Waiting is the key. **
- Connected to http://192.168.1.1 using Internet Explorer.
- Download this file: ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin
- Go to the firmware upgrade page and upgrade the router to the file you downloaded in the previous setp
- Wait at least five full earth minutes AND until you get until Upgrade Successful message and lights returned to normal.
- Do a 30-30-30 Hard Reset.
Now you can can begin configuring your router.
Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser.