Which authenttcation/connection type & can't find 'VLAN

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
View previous topic :: View next topic  
Author Message
MiddleAgedGrump
DD-WRT Novice


Joined: 10 Mar 2024
Posts: 3
PostPosted: Sun Mar 10, 2024 8:46    Post subject: Which authenttcation/connection type & can't find 'VLAN Reply with quote
I am trying to use my ONT-connected Ausus RT-AC5300 router (running latest DD-WRT firmware)to get internet but nothing's working. I live in New Zealand and have an active One NZ fibre connection. I have been told I need to set DHCP/IPoE as the authentication type with VLAN 10 tagging on the WAN interface.

I can't find 'VLAN 10' tagging anywhere and it's still unclear which authentication/connection type I need - my ISP's 'how to connect' page only specifies modem settings and these settings have no verbatim equivalent in my DD-WRT GUI.
Back to top View user's profile Send private message
Sponsor
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3006
Location: Germany
PostPosted: Sun Mar 10, 2024 10:08    Post subject: Reply with quote
See my signature

1 CPU Port - Simple VLAN tagging on the WAN port.

first try DHCP as WAN connection type
_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
Back to top View user's profile Send private message
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1959
PostPosted: Sun Mar 10, 2024 11:00    Post subject: Reply with quote
By latest, you mean 03-06-2024-r55303 we hope.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Back to top View user's profile Send private message Visit poster's website
MiddleAgedGrump
DD-WRT Novice


Joined: 10 Mar 2024
Posts: 3
PostPosted: Sun Mar 10, 2024 22:15    Post subject: Reply with quote
Thanks,

"By latest, you mean 03-06-2024-r55303 we hope." What's the "experimental_driver/" for? Do I need to install this too?
Back to top View user's profile Send private message
MiddleAgedGrump
DD-WRT Novice


Joined: 10 Mar 2024
Posts: 3
PostPosted: Mon Mar 11, 2024 0:05    Post subject: Reply with quote
Thanks for all your help so far. I am a networking noob and I'm finding it hard following your directions. I have upgraded to the firmware you suggested. The router's ethernet cable connect light is on as well as the globe symbol light (connected to internet?). The ethernet cable is plugged into the router's blue-coloured internet port, not a LAN port. This ethernet cable is plugged into LAN 1 (light showing connected) on the ONT.

I thought I'd post some screenshots of what I think are the tabs on my router I need to make changes to.

https://imgur.com/a/40Bs7AX

Apart from populating fields/ticking boxes, do I also need to write and apply scripts? Am total novice at this when it comes to routers.
Back to top View user's profile Send private message
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3006
Location: Germany
PostPosted: Mon Mar 11, 2024 7:53    Post subject: Reply with quote
If I am not mistaken, I have given you precise instructions.
_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
Back to top View user's profile Send private message
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1959
PostPosted: Mon Mar 11, 2024 13:31    Post subject: Reply with quote
https://one.nz/help/broadband/modem-support/byo-modem/

VLAN configuration via GUI - 1 CPU port (2nd post in thread)

https://wikidevi.wi-cat.ru/ASUS_RT-AC5300

one.nz.fibre.png
 Description:
 Filesize:  27.61 KB
 Viewed:  798 Time(s)

one.nz.fibre.png

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Back to top View user's profile Send private message Visit poster's website
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum