Author
Message
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Back to top
Sponsor
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Posted: Tue Oct 14, 2008 2:08 Post subject:
Micro plus is ONLY for routers with a compressed CFE file. See Redhawks sticky, above.
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Tue Oct 14, 2008 3:42 Post subject: Suggestion
Which one do you suggest I should use for v8.1 ?
Thanks.
Back to top
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Posted: Tue Oct 14, 2008 4:22 Post subject:
Depends whether you are with original firmware or not. Do some research on whether the latest builds work. See this thread
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=159124#159124
And Redhawks thread about CFE compressors.
I don't like to recommend which version to use with a router I don't have.
Back to top
soulstace DD-WRT Guru Joined: 04 Aug 2007 Posts: 6427
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Tue Oct 14, 2008 13:41 Post subject:
I've tried the following:
dd-wrtv24-10305_NEW_micro-plus.bin
dd-wrtv24-10404_NEW_micro-plus.bin
dd-wrtv24-10431_NEW_micro-plus.bin
none of them seem stable to me.
It freezes in the Web GUI.
Now I cann't tftp to original version, it give error
but I can ping 192.168.1.1
Can I restore the orginal linksys firmware using Web GUI ?
THanks.
Back to top
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Posted: Tue Oct 14, 2008 17:19 Post subject:
You will have to reinstall vxworks, I believe, prior to flashing.
Are you sure that you did a HARD reset of the router, after flashing the firmware? Be sure to clear your browser's cache too.
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Tue Oct 14, 2008 17:30 Post subject:
Sorry I didn't reset after flash.
Let me do that.
Thanks.
Back to top
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Posted: Tue Oct 14, 2008 17:35 Post subject:
ns2397 wrote: Sorry I didn't reset after flash.
BAD dog! Bad.
(Be sure to do a HARD 30-30-30 reset, not a little push button or power cycle reset)
Back to top
soulstace DD-WRT Guru Joined: 04 Aug 2007 Posts: 6427
Posted: Tue Oct 14, 2008 17:43 Post subject:
Just a FYI. The G v8.1 does not run vxworks. You can tell by the fact is has 128K CFE and does not require vxworks killer (vxworks routers have BSP instead of CFE).
Back to top
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Posted: Tue Oct 14, 2008 17:47 Post subject:
soulstace wrote: Just a FYI. The G v8.1 does not run vxworks. You can tell by the fact is has 128K CFE and does not require vxworks killer (vxworks routers have BSP instead of CFE).
Thanks! (Didn't know about the BSP difference.)
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Tue Oct 14, 2008 17:49 Post subject:
update:
after reset 30/30/30.
I found whenever I begin do p2p downloading.
I can't open website but I can download.
I tried with Upnp turned on and off.
Any ideas?
Back to top
soulstace DD-WRT Guru Joined: 04 Aug 2007 Posts: 6427
Posted: Tue Oct 14, 2008 17:52 Post subject:
Murrkf wrote: Thanks! (Didn't know about the BSP difference.)
No problem. I just wanted to post that little bit of info for the benefit of anyone who owns this router.
It's easy to be confused. Both the WRT54G version 8.0 and 8.2 run vxworks from the factory, but 8.1 does not (it runs Linux) :?
If you really need original firmware, you might want to ask Eko how to get it back to stock. I assume it will take it via web interface or TFTP, but I can't say for certain.
Back to top
Murrkf DD-WRT Guru Joined: 22 Sep 2008 Posts: 12675
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Wed Oct 15, 2008 2:22 Post subject:
Just for update:
I'm currently running on:
DD-WRT v24-sp2 (10/14/0 micro
(SVN revision 10509M NEWD Eko)
Everything is fine.
Back to top