Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r53763 std (10/24/23) (prev. DD-WRT v3.0-r53714 std (10/20/23))
Kernel: Linux 6.1.59 #60 SMP Tue Oct 24 07:06:32 +07 2023 arm
Mode: Gateway, SFE disabled, QoS in use, Wifi disabled, Wireguard for external access, WAN to DSL Modem, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Installed a few hours ago, OK. Wireguard is working again, thank you =)
Joined: 08 May 2018 Posts: 14249 Location: Texas, USA
Posted: Tue Oct 24, 2023 16:58 Post subject:
A little update. I noticed that somewhere along the way, the USB 3 (not USB | eSATA) port no longer powers my USB fan. Didn't have the knack to plug into the other port, using an external USB power source. Image for reference only.
EDIT: Logs attached, got my USB fan connected to the USB 2 | eSATA port and it works.
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r53763 std (10/24/23) (prev. DD-WRT v3.0-r53714 std (10/20/23))
Kernel: Linux 6.1.59 #60 SMP Tue Oct 24 07:06:32 +07 2023 arm
Mode: Gateway, SFE disabled, QoS in use, Wifi disabled, Wireguard for external access, WAN to DSL Modem, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Installed a few hours ago, OK. Wireguard is working again, thank you =)
Did you experience disconnection problems from link 1000 to 100 with wrt1900acs v2?
@egc Or anyone else, how can I track if the problem reported by you is also on wrt1900acs v2, or the problem in my case is from the PC?
from what I see brainslayer is trying to solve this problem starting with Changeset 53765?
Microsoft archives the errors from the network card in windows somewhere, how can I see if I'm on windows 11? _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Router: WRT3200ACM
Version: DD-WRT v3.0-r53763 std (10/24/23)
File: ddwrt-linksys-wrt3200acm-webflash.bin
Kernel: Linux 6.1.59 #60 SMP Tue Oct 24 07:06:32 +07 2023 arm
Previous: DD-WRT v3.0-r53633
Reset: No
Mode: AP
Status: Ok
Uptime: ~1 hour
Issues/Errors: None to report at present
This WRT3200ACM is the only 6.1 kernel router updated via GUI.
My EA-8500 and WRT1900ACv1 both bounce back to earlier 4.9 builds. _________________ ------------------------------------
Linksys WRT3200ACM DD-WRT r56029 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Netgear WNDR3700v4 DD-WRT r55819 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
Router: WRT3200ACM
Version: DD-WRT v3.0-r53763 std (10/24/23)
File: ddwrt-linksys-wrt3200acm-webflash.bin
Kernel: Linux 6.1.59 #60 SMP Tue Oct 24 07:06:32 +07 2023 arm
Previous: DD-WRT v3.0-r53633
Reset: No
Mode: AP
Status: Ok
Uptime: ~1 hour
Issues/Errors: None to report at present
This WRT3200ACM is the only 6.1 kernel router updated via GUI.
My EA-8500 and WRT1900ACv1 both bounce back to earlier 4.9 builds.
Are you able to get a serial log from either router? I'd like to compare it to my EA8500 boot logs. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Router/Version: WRT1900ACv1
File/Kernel: 53763 (ddwrt-linksys-wrt1900ac-webflash.bin)
Previous/Reset: 53562/No Reset
Mode/Status: AP
Issues/Errors: As with 53734, my router won't boot 53763. After a slight delay, it boots into the previous build 53562.
I notice this problem in my speed test, I only have 100 Mbps and when I check the network card in the PC it is set to 100 Mbps link, only if I disconnect and then reconnect it returns to 1000 Mbps, it is possible that the ports on the router have problems, this problem that happens randomly once or twice a week happens on all ports on the router!
I have already announced this problem and I have seen other users who also reported this problem on the OpenWrt forum
Since this version, I've had connection drops every minute again. When I'm surfing something in the evening when there's no activity, the connection drops are every 12 minutes. What's remarkable is that it's always just after a full minute. Alo some recurring event could be the cause.
That shows the entries in your RPi, Is there anything in your DD-WRT router syslog? _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
The syslog constantly returns what is known
Oct 28 12:02:04 DD-WRT-EG daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx IEEE 802.11: disassociated
Oct 28 12:02:05 DD-WRT-EG daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
@kosmos: Without screenshots of your current settings, basic and advanced, for wifi, and the tell-tale upnp entries, it's a shot in the dark on what to suggest - but I suspect it to be a configuration issue or client issue. Does this happen every hour per default GTK renewal interval? The Marvell driver doesn't support certain settings for wifi, so, this may be where the problem lies (configuration), or not. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio