StillLearning DD-WRT User
Joined: 22 Jul 2007 Posts: 60
|
Posted: Fri Sep 25, 2009 3:51 Post subject: VPN Server + Client Setup ok but need some help please.. |
|
Hi All,
I have successfully setup the following, using the wiki and going through a lot of posts on this forum for weeks to get to where I am at present.
Linksys WRT54GL with Firmware: DD-WRT v24-sp2 (07/22/09) vpn
VPN Server
Router 1 = Local ip 192.168.1.1(public ip:mydydns.com)
PPTP Server (enabled)
Broadcast support (enabled)
Force MPPE Encryption (enabled)
Server IP:192.168.1.1
Client IP:(s)192.168.1.100-102
CHAP-Secrets:test * mytest *
VPN Client
Router 2 = Local ip 192.168.2.1(public ip:mydydns1.com)
PPTP Client
PPTP Client Options:enabled
Server IP or DNS Name:mydydns.com
Remote Subnet:192.168.1.0
Remote Subnet Mask:255.255.255.0
MPPE Encryption:mppe required,no40,no56,state
MTU: 1450
MRU: 1450
NAT:Enable
User Name:test
Password:mytest
VOIP ATA = Local ip 192.168.2.125 Using port 5060
Asterisk Server Local ip 192.168.1.10
The issue I have is that anybody on the client side can access all my computers shared folders, router login page etc, which is on the server side, I want to be able to block this or not allow anybody from the client side be able to see or connect to any equipment on the Server side, except for the ATA(ip:192.168.2.125 port 5060)which is on the client side to be able to connect to the Asterisk Server (ip:192.168.1.236).
How could I achieve the above, any help, assistance would be greatly appriciated as I am a total newbie to this. _________________ WRT54GL V1.1 DD-WRT
WRT54GS V1.1 DD-WRT & Asterisk |
|